low speed wire cuting

(1) the precision of + / - 0.002 mm, Angle under 10 DHS plus or minus 0.005, more than 10 DHS + / - 0.005-0.005, DHS 20-25 DHS is 0.01 to 0.03;

(2) can be cut up to 200 mm thick, vertical degree of + / - 0.01-0.02;

(3) the diameter of 0.07, 0.1, 0.25, 0.2, thread machining, the smallest R Angle can be cut 0.05 0.01;

(4) the minimum surface roughness of: 0.2 line: 0.32 0.7 (thick 5-200); Thick line 0.25:0.25 0.32 (5-200) : 0.1 line 8 knife WM 0.16 processing, processing of 3-5 knives WM 0.28 (5-50) thick.